Guide How to Flash Lenovo A6000 PLUS to fix Bootloop using CWM Recovery.

Flash Or Install Firmware Lenovo A6000 PLUS. If your Android Lenovo A6000 PLUS device is now in a bootloop state. you can try to fix it using this guide. Generally bootloop on this device occured when already rooted. but it not sure, also on unrooted android device may occured bootloop. Bootlloop occured not caused by Andoid system failure, but sometimes it caused by user. So, if your are a new Android user you must be carefully to use your Android device. On this guide Guidebelajar will explain to you how to flashing android device on Lenovo A6000 PLUS  with easy and simple step using CWM recovery.

Flashing in android is the same way like fresh install on the windows PC, So by perform a flash on Android you will give a new performance like a new phone. One reason that you should perform a flash your android is because your android get bootloop or when you failed to install Stock ROM Mod.

Lenovo A6000 PLUS  Android is a smartphone with a 5,0-inch IPS capacitive touchscreen, 16M colors, works on Android OS, v4.4.4 (KitKat), upgradable to v5.0.2 (Lollipop) system and powered Quad-core 1.2 GHz Cortex-A53 CPU, Qualcomm MSM8939 Snapdragon 61Qualcomm MSM8916 Snapdragon 410 chipset and Adreno 306 GPU as their engine, and combined with 2 GB RAM, and 8 MP on main camera, and 2 MP on secondary camera.

Prerequisites.

Provide this tool and file before you perform flash on bootloop Android Lenovo A6000 plus.

1. You must download and install USB Driver for Lenovo on your windows computer or PC. Here 
2. Then download Minimal ADB and Fastboot on your computer. Here 
3. Download CWM Recovery for Lenovo A6000plus.(CWM recovery.img) Here  
4. Original USB cable for Lenovo A6000 PLUS.
5. Kraft_A6000S_S010_150515.zip Here
6. Backup Kraft_A6000S_S010_150515.zip. Here 
7. Your Lenovo A6000 PLUS device must installed CWM recovery, see this guide 

Run Minimal ADB on Computer.

1. Connect your Lenovo A6000 PLUS to computer using USB Cable.
2. Extract Minimal ADB on your computer
3. Then you can find and open py_cmd.exe on extracted file
4. Run this file and then you type.
• adb devices
5. This command To ensure that the PC recognizes your Lenovo A6000 PLUS device, and if it should be unauthorized make sure that USB debugging at your Lenovo A6000 PLUS is enabled. see this guide how to enable USB debugging. 

#1. Method. Reboot into fastboot mode and flash recovery.img file to Lenovo A6000 PLUS.

1. Once ADB installed properly on your computer
2. Then you type command.
• adb reboot bootloader
3. When you Type this command will reboot the phone on a black screen, and will going in fastboot .
4. Next command you must type 
• fastboot devices
5. This command will confirm the above.
6. Next, type this command
• fastboot flash recovery recovery.img
7. This command will install the much sought CWM, but it is not over yet!
8. to reboot your devices, type this command.
• fastboot reboot
9. This command will restart the device.

#2. Method. How to Install CWM Zip file On Lenovo A6000 PLUS via recovery mode.

follows this step to install the Firmware on the Lenovo A6000 PLUS Smartphone ;

1. Your Lenovo A6000 PLUS must installed CWM recovery.
2. Now, copy zip file into SD Card.
3. Then, power off your device, wait for a moment untill your phone really shut down. 
4. Then, Enter your device into fastboot mode.
5. Now you should turn it On using this combination key.

• power button + volume up + volume down

6. This action will bring you to recovery mode on Lenovo A6000 PLUS,
7. Once you are in recovery mode, just select the option called :
• install zip
• choose zip from /sdcard.
• browse the Kraft_A6000S_S010_150515.zip file you have copied to SD Card on step 2.
8. Wait for few seconds to complete the task, 
9. Once it done, just reboot your device.