Guide to Flash / Install Stock Rom Firmware android Lenovo A2010.

Flash / Install Firmware Lenovo A2010. (This guide just for Lenovo A2010) If you have any problem on your Android system device, you must fix this problem to make your device runing well. As a simple step you can perform a factory or hard reset. this will restore your android device to factory setting, but if this task doesn't make your Android device better, you can perform flashing on your Android device. Now, guidebelajar on this guide will explain to you how to flashing android device on Lenovo A2010 with easy and simple step. Lenovo A2010 announced in August, 2015, and Released 2015, September. Lenovo A2010 is the smartphone with 4,5 Inchi Capacitive touchscreen wide LCD, work on Android OS, v5.1 (Lollipop),  with Mediatek MT6735M Chipset, supported with Quad-core 1 GHz CPU and Mali-T720 GPU, combined with 1 GB of RAM and 5 MP of  Main camera and 2 MP on secondary camera.

Flashing in android is the same way like fresh install on the windows PC, So by perform a flash on Android you will give a new performance like a new phone. One reason that you should perform a flash your android is because your android get bootloop or when you failed to install Stock ROM Mod. 

Do you know what is bootloop, Ok.. now I will explain to you what si bootloop. Some people say that bootloop is a problem that occured on an android system which the android system could not start up going to the homescreen menu. And it's happened is automatically return to the initial state on the first time when you turn on the Lenovo A2010. And the device will stop to display on the smartphone logo.

Now, follow the isntruction list bellow, do it with your own risk.

Prerequisites to Flash Lenovo A2010.

1. Firmware Lenovo A2010:    or Here  
2. Latest Version of flash tool : Here
3. VCOM Driver : Here
4. To ensure what is firmware used by your device, you can check by go to Setting ->About -> Software Information ->Build Number.

Flashing Lenovo A2010.

1. At the first time, please Install driver for Lenovo A2010 that already downloaded before. 
2. Extract the other downloaded file (firmware and flash tool) save in anywhere on your hard drive.
3. Power Off your Lenovo A2010
4. Then remove your back case, battery, sim card and SD Card  if installed
5. Next, Connect your Lenovo A2010 to Computer, while holding the power button and volume up. The PC will detect the new hardware, just ignore it. 
6. Then, release USB data cable from the PC.
7. Open SP flash tool software and click scatter load. find Lenovo A2010 scatter storage location earlier.
8. In the Scatter Loading field go to the folder where you extracted the Flash Tool and select MT6752_Android_scatter.txt 

   

   Flash / Install Firmware Lenovo A2010.

9. Then you click options ->Download -> then check DA DL all with checksum.

   

   Flash / Install Firmware Lenovo A2010.

10. On download tab, ensure you have selected download only option from dropdown menu, see below picture.

    

    Flash / Install Firmware Lenovo A2010.

11. Then, click download button on top right and connect your Lenovo A2010 with USB cable in phone switch off position.



Flash / Install Firmware Lenovo A2010.

12. Process will run automatic, and you can see the red stripe showing download percentage at bellow
13. When your process complete, you can see a green circle with tick mark. 

    

    Flash / Install Firmware Lenovo A2010.

14. Now disconnect your Lenovo A2010
15. Intall you battery again. 
16. Then, start your Lenovo A2010. (remember, on the first booting it will take a long time to start)
17. Success. enjoy



Download Firmware Lenovo A2010.  Here